Jands FP12, Руководство по эксплуатации

Страница: 17 / 20

Technical Data and Specifications 8-1
Revision 0.1 – 3 June 1999 FP12 DIMMER USER MANUAL
8.0 Technical Data and Specifications
PARAMETER FP12
No. of Channels: 12
Input Power Requirements:
3 phase Star only 415 VAC Phase-Phase @ 40A/phase
protected at 50A/phase
Full size neutral required
Maximum Power / Channel 2.4 kW
Minimum Power/Channel 25W
Maximum Dissipation <24 W/channel (<300 W total)
Maximum Ambient Temp 40ºC
Control Signal DMX-512 (1990) Protocol
DMX Input 5 pin AXR male / female
Test Function Level Individual Channels @ 100%
Group Channels @ 10% steps
LED Indicators DMX IN, STATUS,
Phases A, B, and C
Output Protection 12 x 10 Amp thermal/magnetic circuit breakers
Over-temperature cutout Electronic: 83
o
C rising, 78
o
C falling
Mechanical: 90
o
C
Over-voltage cutout Average 290VAC
Ingress protection IP20
Size (mm) 482 (w) x 133 (h) x 250 (d)
Weight 16 kg net
Rack mounting requirements 3 x 19” rack spaces / standard spacing for mounting holes
Ventilation required at sides of rack
No blank spaces required between units
Power inlet at rear right (looking from front of unit)
Rear access required for patching outputs