USER’S MANUAL
23
OPERATION
5.2.4.3 TIME SEARCH
①
Enter the
TIME SEARCH
menu.
②
Select the desired HDD ID, CHANNEL, TIME, and press the ENTER button then you can
playback.
③
Press LV/PB or ESC button to go back the previous menu.
5.2.4.4 EVENT SEARCH
①
Enter the
TIME SEARCH
menu.
②
Select the desired HDD ID, CHANNEL,EVENT, TIME, and press the ENTER button then you can
playback.
③
Press LV/PB or ESC button to go back the previous menu.
NOTE:
- When video loss is detected, up to five seconds of pre-recording data is stored on the HDD and the
details will be listed in the EVENT LIST. The beep sounds and the LED of the ALARM RESET
button will flicker. Press the ALARM RESET button to remove this signal.
- When the unit receives a signal from the sensor input, DVR begins to record the input data
according to the PRE/POST TIME in the RECORD setup and the details will be listed in the
EVENT LIST.
CAUTION
- If the internal HDD(s) is initialized, all of the event images will be deleted.
- When the unit is in normal recording status, the pre-recording will not be executed.