Instructions for use - SaltDome ultrasonic salt therapy device
Maintenance and Cleaning
2-3
clean the device after use as follows:
1.
Disconnect the device from the mains and remove the cover.
2.
Drain the remaining water on the "DRAIN SIDE" of the tank.
3.
Clean the device with a glass of citric acid dissolved in lukewarm water and a soft cloth and wipe dry
with a paper towel (descaling).
4.
Gently clean the ultrasonic cell (small round depression at the bottom of the water tank) with a soft
cloth.
5.
Never use any other acids, enzymes or detergents, as toxic gas may be produced or malfunction may
occur.
6.
Inside the water tank there is also an inner lid that can be removed for cleaning. Locate the handle
and pull out the inner cover.
After cleaning, first insert the air outlet and then press the side of the handle until you hear a click.
7.
To store the device, clean it thoroughly according to the instructions. Once dry, return it to its original
packaging and store in a cool, dry place.
VERY IMPORTANT:
Use only a soft cloth to clean the ultrasound cell. Never touch it with a sharp or hard object.
NEVER submerge the base of the appliance in water and take care not to get water inside the AIR or other
openings.
After charging, DO NOT move the device from one place to another. Always remove the lid and empty the water
tank before moving it to another location.
Transport and storage conditions:
-20
℃
- 55
℃
, humidity ≤95%, pressure 70-106 kPa.
Operating conditions:
5- 40
℃
, humidity 30-80%, pressure 80kPa - 106kPa.
Technical data
Input voltage: 24V
Power: 13W
Humidification method: 2.4Mhz ultrasonic cell
Water tank capacity: 500ml
Noise level: <35dB
Adapter: Input 100-240V~ 50/60Hz
Water resistance: IPX0
Device dimensions: 168x121mm
Weight: approx 520 gr.
