Barcode Scanning
XT2+
User Manual
Janam Technologies LLC Version 2, March 2019
Barcode Scanning 9—5
Scan Demo App
The Janam XT2+ comes preloaded with a
Scan Demo
app. Note that a special Scanner SDK is
available for the development of custom scanning applications (inquire with your Janam sales
representative).
Launch the
Scan Demo
from the
Demos Folder
. Position the XT2+ over one of the
sample
barcodes
on this page. A range of 4–10 inches (10–25 cm) from the bar code is recommended. To
scan, either push one of the XT2+’s two scanner buttons or tap the
Scan Start
button on the screen.
Aim the barcode imager beam at the target barcode. The aiming dot should be centered in the
barcode to achieve quickest and most accurate decoding. When the barcode is successfully decoded,
the little
decode LED
in the upper lefthand corner flashes blue and the terminal beeps.
Upon a successful scan, the scanner decoder will report the symbology of the code as well as the
scan data. It will also report the success/failure rate, as well as read time data and statistics.
N6603 Example Read Ranges (near to far)
100% U.P.C.
1.8 to 16.5 inches (4.6 to 41.9 cm)
5 mil Code 39
2.5 to 6.4 inches (6.4 to 16.3 cm)
10 mil Code 39
1.1 to 13.3 inches (2.8 to 33.8 cm)
6.7 mil PDF417
1.8 to 7.3 inches (4.6 to 18.5 cm)
10 mil DataMatrix
2.1 to 8.0 inches (5.3 to 20.3 cm)
good scan
failed scan
Code 39
PDF 417
