XT2+ Setup
XT2+
User Manual
Janam Technologies LLC Version 2, March 2019
XT2+ Setup 3—1
Removable Memory
IMPORTANT NOTE!
To avoid possible damage to microSD and/or SIM cards or the XT2+ itself, ESD
(electrostatic discharge) precautions are recommended when installing or removing
microSD and/or SIM cards. Before handling, discharge any personal static electric
buildup to a point of discharge other than the device.
microSD Card
About microSD Cards
The XT2+ rugged touch computer has a microSD flash memory card slot in its battery compartment
that is compatible with microSD memory storage cards with a capacity of up to 64GB (FAT32 file
format). Removable microSD memory is useful for general file storage, uploading and downloading
of user data, and more. The use of high-quality microSD cards supplied by a reputable manufacturer
is recommended.
To access the microSD card slot:
Remove the battery compartment cover on the back of the unit by
sliding the spring-loaded cover lock to the left, holding it in that position,
and then gently pulling the cover up by the two tabs on the left and right
of the cover. Remove the XT2+ battery by pulling on the black plastic
tab until the battery pops out.
To install the microSD card:
Locate the microSD card slot in the battery compartment. Place a
compatible microSD card with its straight edge down (towards the
bottom edge of the XT2+) and its brand and capacity markings facing
toward you. Fully insert the microSD card. DO NOT attempt to insert the
microSD card in any other orientation. Put the battery back into its
compartment and put the battery compartment cover back on.
To remove the microSD card:
Before removing a microSD card, Go to
Settings
>
Storage and USB
>
SD card
. Tap the eject symbol and the card will be unmounted. Then
remove the battery compartment cover, remove the battery, and gently
remove the microSD card.
XT2+ Setup
3
