XM70
User Manual
5-2
Janam Technologies LLC
Enabling the ScanWedge feature
When the ScanWedge feature is enabled, data can be entered into
the specified application by opening the application on the handheld
and scanning a barcode.
1.
Go to
Start menu > Scan Folder> ScanWedge
.
2.
Select
Enable
from the
ScanWedge
menu.
3.
Tap
Setup
> Symbology Config
. You can then select
enable
all
to enable every type of barcode or manually select the barcode
symbologies you need.
4.
Tap
OK
.
Note:
The ScanWedge function will be disabled if manual scanning is initiated either by a
command API or by using the Janam Barcode Test progra
m.
