OPERATING GUIDE
POWER - UP
When first powered up, the LCD display on your
7112 Vending System
will scroll the following message ”
Jamex
, Inc. ©
2010 7112 “
the date of the firmware version
”. This will be followed by the prompt “Insert Your Card”
OPERATION OF THE JAMEX 7112 VENDING SYSTEM
Jamex
Copy Cards are required for the operation of your Stand Alone Card Reader. These cards are ordered from
Jamex
and are formatted to work with the Jamex reader. Jamex Stored Value Copy Cards are white with blue graphics.
Management Cards are blue with white graphics. On the face of the stored value copy cards are the words ”Copy Card”, the
Jamex
logo and a stylized blue arrow. On the back of the card is a magnetic stripe which stores the security coding that
designates your cards as specific to your location, and the stored value which allows the patron to buy services.
These cards may also be coded to differentiate between four distinct groups of users. These user groups are sometimes
referred to as Site Code. The activity for each Site Code is tracked separately in the meters of your 7112. When a copy card
is inserted into the 7112 Card Reader it will determine that the card is acceptable to that reader, record the activity, and
determine what price to charge and to deduct from the value stored on the card for the service purchased. Stored Value Cards
are programmed with a Site Code. The Site Code programed to the Stored Value Card must match one of the four Site Codes
programmed to the Card Reader. This security feature ensures that the Vend System is coded to one facility.
Begin a transaction by inserting a Copy Card arrow end first and face up into the card reader. The display will show the
value stored on the card. When this value meets or exceeds the vend price, the copier (micro fiche reader, fax machine, etc)
will be enabled. Each time the copier makes one copy, the value stored on the card will be decreased by the cost per copy
and the display will show the remaining value left on the card. The copier will remain enabled as long as the value stored on
the card remains at or above the vend price. When the patron is finished they may terminate the transaction by pressing the
white “Card Return” button. The display will read “Wait” for a few seconds. The card’s magnetic stripe will be encoded
with any unused value and the card will be returned to the exit position. The display will read “Take Card” and the copier will
be disabled.
CAUTION: It is very important not to interrupt the power source or to remove the copy card without first pressing
the white “Card Return” button. If either of these actions is attempted, the card will not be encoded with any unused
value and the card will no longer be useable.
2
