PROGRAM VALUE TO CARDS
The blue “Set Card Value Card” allows you to program value to stored value cards. Follow the steps below to adjust the
value to be added to cards.
Begin the process of programming cards by inserting the “Set Card Value Card”.
-the display will show “Card Val,” for an instant and will return the card to the exit position
-the display will begin flashing “SetValue”,
020.000 /\
If the amount displayed is the value to be programed on the Stored Value Cards, remove the “Set Card Value Card”.
To increase the value to be programmed press the white button on the front of the reader.
-the display will increase by a value of $.001 cent for each time the white button is pressed
.
If you press and hold the white button, the amount will continue to increase until you release the button.
To decrease the value to be added to the Stored Value Cards, remove the Set Card Value card and immediately reinsert the
card.
The display will begin flashing SetValue, 020.000 \/
If you press the white
Card Return Button in the same way as described above the value will decrease.
When finished adjusting the value, remove the “Set Card Value Card”.
The display will scroll Set Card Value $20.00
All Stored Value Cards inserted in the Model 7112, while in the Set Card Value Mode, will be encoded with this value.
When finished programming Stored Value Cards, insert the “Set Card Value Card”.
The display will read EXIT Set Card Value
.
The Model 7112 will now be in Vend Mode.
7
