2
JAMESONTOOLS.COM
|
800.346.1956
1. Insert Square Plugs into:
• Both ends of both support tubes
• Top end of both legs
• Both ends of both handles
2. Using rubber mallet insert end of left handle between lower support tabs in leg. Rubber handle and support tabs on handle shall be
above tube. Make sure holes align by inserting screwdriver through holes. Use fasteners in the following sequence to secure both
pieces together.
3. Assemble the support tube between the left handle and the leg using the support tabs, in the same manner. Secure each joint using
the same fastener sequence.
4. Tighten hex bolt and nut using the ratchet tool and wrench
5. Repeat the process for the right handle.
6. For transportation insert the axle through the axle support tube on the side of the right handle and secure in place using one clevis pin.
Insert the other clevis pin through another hole to prevent misplacement.
Assembly
Required Tools
Rubber Mallet
Medium Phillips Screwdriver
Ratchet Tool with 9/16” Socket
9/16" Wrench
Hex Bolt
Flat Washer
Support Tab
Flat Washer
Split-Lock
Washer
Hex Nut
