TRUSS-CLAMP MOUNT 8260-465B for GENELEC 8260A
instruction manual
1. setup
1.
The TRUSS-CLAMP
1.
is ready for set up.
2. monitor mounting
2.
Bolt together GENELEC 8260A and bracket.
2.
Screw in five bolts M6x16 with washers.
2.
Use an allen wrench SW5.
easy handling,
adjustable direction and angle
3. truss mounting
3.
Tighten truss clamp to adequate
3.
frame tube (2" / ø 51 mm).
3.
Use washer, hexnut M12 and the
3.
wing nut to secure the assembly.
