Step 24 - Build an Enclosure
This could be anything you'd like it to be, just be creative. Either you might want something ordinary, like a dark box, or you might
want people to see all the electronics that are underneath the cube. Whatever it may be, have fun with this part.
Step 25 - Code and Sendoff!
There are a variety of source codes and header files for you to use and play around with in order to add additional effects. So far on
the code I have more than ten different effects going. Play around with the order, delay, and iterations to truly make it unique!
Well, that's it for instructions. I hope you had fun building this project and at least pulled something worthwhile out of it. Show it off to
your friends and family, because they will surely get a kick out of it. This project couldn't have been completed without the assistance
from CHR and his Instructable, so a special thanks to him. Be sure to keep a creative attitude and never stop progressing. I'll set you
off your own way now, and until next time!
Here's CHR's Instructable for further guidance:
http://www.instructables.com/id/Led-Cube-8x8x8/
