Jam HX-P101, Инструкция, Страница: 3 / 135

EN 3
SET UP
USE
CHARGING YOUR SPEAKER
The “Hang Up” speaker is powered by a rechargeable
battery. The speaker comes pre-charged; however, for
optimal playtime, make sure to charge before first use.
A – Unwrap the integrated charging cable and plug the
micro USB end into the charging port on the speaker.
B – Connect the larger USB plug to your computer
or a powered USB AC adapter. An AC adapter is not
included in the box, but you can use the one for your
cell phone or pick one up next time you’re at the
store.
C – When the LED flashes red, it indicates that the
battery is low and it’s time to plug in and recharge.
Charge for about 2 hours to get up to 8 hours of play
time; while charging, the light will stay solid red.
Once fully charged, the light will turn off.
A – TURN ON YOUR SPEAKER
Long press the “play/pause” button for 3 seconds to turn
on your speaker.
B – CONNECTING TO A DEVICE
Once turned on, the speaker will immediately search for a
device to pair to; the LED will blink red and blue alternately.
Enable Bluetooth on your device. From the Bluetooth
menu, select “Hang Up.” When the device and Hang Up are
connected, you will hear a tone and the LED will turn
solid blue.
Once paired, your device and speaker will find each other
every time, as long as your device’s Bluetooth is on. If
you’re connecting to a computer, you may have a few more
steps on that end. You’ll have to get that information from
the computer company.
Depending on your device, you may be prompted to enter
a pairing code. If so, use “0000” as the code. Holding down
the “X” and “O” buttons at the same time, for 5 seconds,
will disconnect a paired device.
You may also connect your device to Hang Up using an
aux cord, which is not included. When plugged in, the light
will turn solid red.