JP5530 1-3KVA
10
Turning on and completely powering down the UPS
Note:
The battery is fully charged before delivery. However, storage and transportation will
inevitably cause some charge loss. Therefore, it is advisable to charge the battery for 10
hours before using it, so as to ensure adequate battery autonomy.
4.2 Turn on /Shut off UPS
4.2.1 Turn on UPS in mains mode
Press button for more than 1 second, UPS will start. At the same time UPS will make
self-checking, all the indicators on the panel will turn on and power off one by one.
UPS goes to work normally after self-checking, all the indicators as below:
(Inverter mode)
Note: If mains abnormal, UPS will work in battery mode.
UPS provide power to load.
4.2.2 Turn on UPS without utility power
Press button for more than 1 second, UPS will start. In the power on process, the UPS
has the same operation as if it is connected to utility power indicator is not turned on and
