page: 17 / 20
3.8.8. Using handle (only manual drive or motor drive with NHK)
●
Awnings handle into the loop of the gearbox. By turning the handle can open or close the awning.
●
Awning fabrics must be roll up on the right side (from top) otherwise it can damage the sheathing and
the awning.
WRONG
RIGHT
3.8.9. Check the awning after installation
After installation, check items from the list below:
●
Operation (manual or electric).
●
Stability.
●
Proper operation of limit switches.
3.8.10. Training and instruction of the end user before awning in use
Installation team must fully inform the end user about safe use of the awnings.
3.8.11. All manuals, as well as installation and setting instructions of the motor, switches and
controllers must be given to the user
After assembly, the person in charge of the installation team must sign The handing over protocol/Waranty.
According to knowledge of local conditions and after completion of the assembly, installation team declares
the user whether the manufacturer's wind class was achieved. If not, the installation company must to
document the actual achieved wind class rating. It should be also give in the document the setting of the
screws "C" - see section 3.8.5 of the manual. (Changes can be made only by a trained installation team.
Changes confirm with stamp and signature).
The handing over protocol must be countersigned by the user and installation team.
After assembly the following instructions must be passed to end user:
●
Installation manual.
●
Service and maintenance manuals and warranty (with wind class of the awning).
●
Settings (only for motor drive).
●
Sun and wind automatic instruction (only for awning with automatic).
●
Remote Control Guide (only remote controled awnings).
●
Handing over protocol/Waranty.
3.9.
Repair the awning
Repairs should be carried out only by a specialist. Only spare parts from DRAGON
can be used.
CAUTION!
The Arms are under extreme tension. Risk of personal injury!
