Setting range
Default value
Description
Configure analog control settings.
Off, On
Off
In IndividualGainMode, R, G, B can be configured individually for the entire
gain adjustment range of the sensor.
ー
ー
Select the gain to configure.
[Setting range]
IndividualGainMode : On DigitalGreen, DigitalRed, DigitalBlue
IndidualGainMode : Off DigitalAll, DigitalRed, DigitalBlue
Gain
ー
x1.0
Set the gain value for the gain setting selected in [GainSelector].
[Setting Range]
IndividualGainMode : On DigitalGreen : x1.0 〜 x64.0
DigitalRed: x1.0 〜 x64.0
DigitalBlue: x1.0 〜 x64.0
IndidualGainMode : Off DigitalAll: x1.0 〜 x32.0
DigitalRed: x0.4 〜 x4.0
DigitalBlue: x0.4 〜 x4.0
Off, Once
Off
Enable/disable gain auto adjustment.
30〜95
ー
Set the target level for GainAuto.
ー
ー
Allows confirmation of the current status during gain auto adjustment.
Idle : Auto Gain Control is not executed yet.
Succeeded : Auto Gain Control was Succeeded.
Error1 - Timeout : Timeout error has occurred. Please try again.
Error2 - Control_Limit : Gain becomees outside a range.
Error3, Error4, Error5 - Undefined Error
x1(0dB), x2(6dB),
x4(12dB)
x1(0dB)
Set the gain value for the analog gain setting selected in [Analog Gain Selector].
All, Red, Blue
All
Select the black level to configure.
BlackLevel
DigitalAll -133〜255
DigitalRed -64〜 64
DigitalBlue -64〜 64
DigitalAll 0
DigitalRed 0
DigitalBlue 0
Set the black level value.
Off,
Once,
Preset5000K,
Preset6500K,
Preset7500K
Off
Enable/disable auto white balance.
16〜4096 step 16
4096
Set the area for adjusting white balance.
0 〜 4080 step 16
0
Set the area for adjusting white balance.
ー
Idle
Display the result for adjusting white balance.
0:Idle
1:Succeeded
2:Error1 - G image was too bright
3:Error2 - G image was too dark
4:Error3 - Timeout
0.45, 0.5, 0.55, 0.6, 0.65,
0.75, 0.8, 0.9, 1.0
0.45
Set the gamma value.
Off, Gamma, LUT
Off
Select the LUT mode.
Setting range
Default value
Description
Configure LUT settings.
Red, Green, Blue
Red
Select the LUT channel to control.
0〜256
0
Set the LUT index table number.
LUTValue
0〜4095
Gamma≒1.0
Set the LUT value.
Setting range
Default value
Description
RGB, XYZ, HSI
RGB
Set the output image format.
Off, sRGB, AdobeRGB,
UserCustom
Off
Set the detailed mode when RGB is selected for the color space.
ー
RR
Select the ColorMatrix setting component.
[Setting range]
RR, RG, RB, GR, GG, GB, BR, BG, BB
ColorMatrixValue
-2.0 〜 2.0
ー
Set the Color Matrix value.
[Default value]
ColorMatrixValue [RR] = 1.0, ColorMatrixValue [RG] = 0, ColorMatrixValue [RB] = 0
ColorMatrixValue [GR] = 0, ColorMatrixValue [GG] = 1.0, ColorMatrixValue [GB] = 0
ColorMatrixValue [BR] = 0, ColorMatrixValue [BG] = 0, ColorMatrixValue [BB] = 1.0
GainAuto
AGCReference
AGCOnceStatus
Item
Item
GainSelector
Balance White Auto
BlackLevelSelector
IndividualGainMode
Item
ColorMatrixValueSelector
Color Transofrmation RGB Mode
Color Transformation Mode
d） Analog Control
e） LUTControl
f） Color Transformation Control
AnalogBaseGain
LUTIndex
Balance White Auto Width
Balance White Auto OffsetX
Balance White Auto Result
LUTSelector
LUTMode
Gamma
SW-4000TL-SFP
— 45 —
