Setting range
Default value
Description
Correct variations due to sensors and lenses.
Off, Default, User1,
User2, User3
Default
Select the user area to which to save the black level correction value.
ー
ー
Generate black level correction data automatically from the captured image.
Caution
When [Pixel Black Correction Mode] is set to [Off] or [Default] and a test pattern is being output
instead of an image, this command cannot be executed.
ー
ー
Display the results of
[Calibrate Pixel Black Correction] execution.
The results will be one of the following.
0:Idle
1:Succeeded
2:Error1 - Image was too bright
3:Error2 - Image was too dark
4:Error3 - Could not calibrated
Off, Default, User1,
User2, User3
Default
Select the user area to which to save the gain correction value.
ー
ー
Generate gain correction data automatically from the captured image
Caution
When [PixelBlackCorrectionMode] is set to [Off] or [Default] and a test pattern is being output
instead of an image, this command cannot be executed.
ー
ー
Display the results of [Calibrate Pixel Gain Correction] execution.
The results will be one of the following.
0:Idle
1:Succeeded
2:Error1 - Image was too bright
3:Error2 - Image was too dark
4:Error3 - Could not calibrated
Off, Lens1, Lens2,
Lens3
Off
Correct the color aberration that occurs at the left and right edges due to
lens characteristics.
Chromatic Aberration Correction
Selector
R Channel,
B Channel
R Channel
Specify the channel for which to perform [Chromatic Aberration Correction
Lens1,2,3].
Chromatic Aberration Correction
ー
0
Set the amount of correction for [Chromatic Aberration CorrectionLens1, 2, 3].
[Setting range]
R, B Channel -4 〜 4 (step 0.1)
Red, Green, Blue
Red
Select the target to apply FIR Filter from Red, Green, Blue.
FIR Filter Mode
Off, On
Off
Enable / Disable FIR Filter.
FIR Filter Left Ratio
-2 〜 2
ー
Set the coefficient of the left pixel when FIR Filter is applied.
FIR Filter Center Ratio
-2 〜 2
ー
Set the coefficient of the center pixel when FIR Filter is applied.
FIR Filter Right Ratio
-2 〜 2
ー
Set the coefficient of the right pixel when FIR Filter is applied.
Red, Green, Blue
Red
Select the target to apply Median Filter from Red, Green, Blue.
Median Filter Mode
Off, On
Off
Enable / Disable Median Filter.
Setting range
Default value
Description
Corrects the spatial pixel differences individually for the R, G, and B lines
captured by the trilinear line sensor.
ー
Default
Select area to save.
[Seeting range] Off, Default, User1, User2, User3
Manual, Auto
Manual
Set the spatial compensation mode.
Red, Green, Blue
ー
Select the channel.
Spatial Compensation Value
0〜8 step 0.1
0
Set the compensation value for each channel.
Forward Direction,
Reverse Direction
Forward Direction
Set the direction moving objects.
ー
Line4(TTL In 1)
Select the input to use for obtainning the movement direction information for
the object.
*) This setting is valid in SpatialCompensationMode : Auto .
[Setting range]
Low, Hight, Line5(OptIn1), Line4(TTLIn1), Line10(TTLIn2), Line13(TTLIn3),
EncoderDirection
0.5 〜 2.0 Step 0.1
1.0
Set the amount of movement in pixels of the imaging subject within the sensor
during a single trigger.
*) This setting is valid in SpatialCompensationMode : Auto .
FIR Filter Selector
Median Filter Selector
Object Direction Source
Spatial Compensation Distance
Calibrate Pixel Gain Correction
Object Direction
Spatial Compensation Selector
Item
r） Spatial Control
Spatial Control
Spatial Compensation Mode
Pixel Gain Calibration Result
Chromatic Aberration Correction Mode
r） Correction
Pixel Black Correction Mode
Item
Calibrate Pixel Black Correction
Pixel Black Calibration Result
Pixel Gain Correction Mode
SW-4000TL-SFP
— 45 —
