SW-2001Q-CL
5
3.
Main features
•
4CCD line scan camera with 2048 pixel resolution
•
Dichroic beam splitter prism to separate R,G,B and NIR wavelengths
•
19,048 lines per second scan rate(@No-Shutter mode)
•
40 MHz pixel clock
•
4 x 8 bits or 4 x 10 bits output through Camera Link interface
•
Flat-field correction. Two point pixel-by-pixel compensation on each R,G,B and NIR
channels
•
Master gain control in the range of -3dB to +12dB with a fine gain control
•
Flat Shading correction and Color Shading Compensation
•
One-push auto white balance
•
Binning function to increase sensitivity
•
Gamma correction using LUT(Look Up Table)
•
Auto reset function
•
Noise reduction function
•
Test pattern generator( color bar, gray, white ) for set-up and trouble shooting
•
Electronic shutter (for selected modes)
•
Short ASCII commands set-up via RS 232C or Camera Link
•
M52 mount or F mount selectable
•
Setup by Windows 7/8/10 software
About
M52 mount: SW-2001Q-CL-M52 employs an M52 mount. This mount is recommended in
the lens guide
line for machine vision applications which is set by Japan Industrial Imaging
Association in corporation with AIA and EMVA. The title of the guideline is “JIIA LER 004-2010
Recommended Mechanical Interfaces Applied for Each Image Size Classification” and issued on
March 10th, 2010.
1.
General
The SW-2001Q-CL is a 4CCD line scan camera using four 2048 pixel line sensors mounted on a prism,
for the R, G,B and NIR channels. It operates with a 40 MHz pixel clock, resulting in a maximum line
rate of 19,048 lines per second.
The camera outputs digital data in 4 x 8 bits or 4 x 10 bits format via Camera Link. The camera is
configured by software through the serial communication port of the Camera Link interface, or via
RS-232C through a 12-pin Hirose connector.
The camera can be ordered with an M52 mount or with an F-mount lens mount.
The SW-2001Q-CL is a suitable camera for various applications such as inspection of fruits,
vegetables ,circuits boards or electronic/mechanical parts, as the NIR image can catch scratches or
blemishes on object surfaces which the RGB color image cannot find.
For camera revision history, please contact your local JAI distributor
2.
Camera nomenclature
The standard camera composition consists of the camera main body and sensor protection cap.
A lens is not included with the delivery.
The camera is available in the following versions:
SW-2001Q-CL-M52 with M52-mount
SW-2001Q-CL-F with F-mount
