JAI SP-45000M-CXP4, Руководство пользователя

Страница: 61 / 71

Setting range Default value Description
Correct variations due to sensors and lenses.
EdgeEnhancerEnable True, False False Enable/disable EdgeEnhancer.
EdgeEnhancerLevel 0:Low,
1:Middle,
2:High,
3:Strong Middle Set the Level for EdgeEnhancer.
0:Off,
1:On Off Enable/disable VideoProcessBypass mode.
Configure settings for JAI white blemish correction.
True, False True Enable/disable blemish correction.
ー ー Execute blemish detection.
This command can not be executed under the following conditions.
・When no image is output
・Outputting TestPattern
・In Sequencer mode
・In MultiRoi mode
・In single ROI mode
1 〜 99 10 Set the blemish detection threshold.
ー ー Stores the Blemish data that to be entered by
1 〜 1000 1 Select the index for the target blemish coordinates
(BlemishDataPosition X/Y).
BlemishCompensationPositionX -1 〜 8191 ー Display the X coordinate (horizontal pixel position) of the target blemish
selected in [BlemishCompensationIndex]. You can also manually enter the X
coordinate of the blemish you want to correct.
BlemishCompensationPositionY -1 〜 5439 ー Display the Y coordinate (vertical pixel position) of the target blemish
selected in [BlemishCompensationIndex]. You can also manually enter the Y
coordinate of the blemish you want to correct.
BlemishCompensationDataClear ー ー Delete detected or specified blemish information selected in
0 〜 1000 0 Display the number of target blemishes.
Configure settings for Multi ROI.
0: Off,
1: On Off Enable/disable Multi Roi.
0 〜 7 Select the index for the Multi Roi mode.
MultiRoiWidth ー ー Set the width for the selected Multi Roi index.
MultiRoiHeight ー ー Set the height for the selected Multi Roi index.
MultiRoiOffsetX ー ー Set the horizontal offset for the selected Multi Roi index.
MultiRoiOffsetY ー ー Set the vertical offset for the selected Multi Roi index.
1 〜 8 ー Set the maximum number of valid horizontal index numbers.
1 〜 8 ー Set the maximum number of valid vertical index numbers.
Configure settings for Lens Communication Control.
0, 1 0 Enable RS-232C for lens control.
0:9600bps
1:19200bps
2:38400bps
3:57600bps
4:115200bps Set the baud rate during communication.
0:7bit
1:8bit Set the data length during communication.
0:None
1:Odd
2:Even Set the presence or absence of parity bit during communication.
0:1bit
1:2bit Set the stop bit during communication.
Update LensCommunicationRecvData
Displays data received from the lens to be controlled.
Transfers commands to the lens to be controlled.
BlemishCompensationNumber
o) Correction
EdgeEnhancer
Item
p) Misc
VideoProcessBypassMode
s) LensCommunicationControl
LensCommunicationRecvDataUpdate
r) MultiROIControl
LensCommunicationRecvData
LensCommunicationSendData
LensCommunicationEnable
LensCommunicationBaudrate
LensCommunicationDataBit
LensCommunicationParity
LensCommunicationStopBit
MultiRoiVerticalEnableNumber
MultiRoiIndex
MultiRoiMode
MultiRoiHorizontalEnableNumber
q) BlemishControl
BlemishEnable
BlemishDetect
BlemishCompensationIndex
BlemishDetectThreshold
BlemishStore
— 61 —
SP-45000M-CXP4/SP-45000C-CXP4