JAI SP-45000M-CXP4, Руководство пользователя

Страница: 10 / 71

⑤ DC IN/TRIG connector （ 12-pin round ）
Connect the cable for a power supply (optional) or for DC IN / trigger IN here.
HR10A-10R-12PB （ 71 ）（ Hirose Electric or equivalent ）
TTL signal specification
TTL out signal specification (Typ.)
Output voltage ： Low 0.0V
High 5.0V
TTL in signal specification (Typ.)
Input voltage ： Low 0.0 ～ 0.8V
High 2.0 ～ 5.5V
— 10 —
SP-45000M-CXP4/SP-45000C-CXP4
Pin No.
Input/Output
Signal Description
1 GND GND
2 Power In DC In DC 10 V ～ 25 V
3 NC
4 NC
5 In Opto In 1-
6 In Opto In 1+
7 Out Opto Out 1-
8 Out Opto Out 1+
9 Out TTL Out 1 Line 1
10 In TTL In 1 Line 4
11 Power In DC In DC 10 V ～ 25 V
12 GND
Line 5
Line 2
Digital I/O
Control
Note
Be sure to use a power supply that can support the maximum power consumption
of this camera.
The output impedance of TTL Out is high, so it is not suitable for applications that require
a lot of current. Use Opto Out for applications that require a lot of current, or use an
external current buffer.
Caution