manualshive.com logo in svg

JAI RM/TM-1327GE Series, Руководство пользователя

Поделиться
Скачать
JAI RM/TM-1327GE Series Скачать руководство пользователя страница 3

 

 

 

 

 

 

Disclaimer iii

 

RM/TM-1327GE Series 

 

 

 

Notice 

The material contained in this manual consists of information that is proprietary to JAI, Inc., and may only be 
used by the purchasers of the product. JAI, Inc. makes no warranty for the use of its product and assumes no 

responsibility for any errors which may appear or for damages resulting from the use of the information 
contained herein. JAI, Inc. reserves the right to make changes without notice. 

Microsoft, Windows XP, Windows 2000, Windows 98, Windows NT, and Windows Explorer are either registered 

trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. 

Warranty 

For information about the warranty, please contact your factory representative. 

Certifications 

CE Compliance 

The TM-1327GE series of cameras have been certified to conform to the requirements of Council Directive 
89/336/EC for electromagnetic compatibility and to comply with the following European Standards: 

     Emissions: EN 55022A: 1998 + A1: 2000 + A2: 2003 

     Immunity: EN55024: 1998 + A1: 2001 + A2: 2003 

All JAI products bearing the CE mark have been declared to be in conformance with the applicable EEC Council 
Directives. However, certain factory-installed options or customer-requested modifications may compromise 
electromagnetic compatibility and affect CE compliance. Please note that the use of interconnect cables that 
are not properly grounded and shielded may affect CE compliance. 

Contact JAI Applications Engineering Department for further information regarding CE compliance. 

FCC 

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. This equipment generates, uses 
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction 
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential 
area may cause harmful interference, in which case the user will be required to correct the interference at his 
own expense. 

 

.

Содержание RM/TM-1327GE Series































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды