JAI LQ-050CL Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 56

background image

LQ-050CL

24

7. Functions listed alphabetically by command acronyms

7.1 Command AHRS – Request Status After One-Push AWB

This command returns the status of the one-push AWB function, with the following
parameters:

0=AWB not completed yet

1=Succeeded

2=Error1: Green image too bright

3=Error2: Green image too dark

4=Error3: Timeout occurred

7.2 Command AL – Automatic Line Rate Reference Level

This command is a target of luminance level when command AR is activated.

Settings:

0 to 1023 (for both 8-bit and 10-bit)

Applicable modes:

No-Shutter with internal trigger
Shutter Select with internal trigger

Associated functions:

Command AR

7.3 Command AR – Automatic Line Rate Setting

The line rate can be adjusted from 1L to 1024L. This function will calculate and  set the
line  rate  of  the  camera  based  on  the  Automatic  Line  Rate  Reference  Level  (as  set  in
command AL) and the scene illumination. Please note that the aspect ratio of the scanned
object will change as the line rate is changed.

Settings:

0 (activate automatic process)

Applicable modes:

No-Shutter with internal trigger

Shutter-Select with internal trigger
Associated functions:

Command AL

Note



The data can be stored in the camera memory for next start up.

7.4 Command ARST – Auto Reset Mode

This function enables/disables the Auto Reset mode, which prevents offset rising in special

case where line triggers are not received for long periods of time.

Settings 0 (off) and 1 (on). Factory default is 0 (off).

In this mode, when a trigger pulse does not occur after more than  53ms, the  LQ-050CL
automatically returns to the internal trigger mode with the line rate of approx. 14.1μsec.
In this time, the camera operates by the internal trigger, and if the external trigger is input,
the  video  is  immediately  output.  In  the  Shutter-Select  mode,  the  exposure  starts
immediately    after the trigger is input and the camera outputs the video. In the No-Shutter
mode, the exposure will start immediately after the trigger is input, but the video output
is available after the second trigger pulse is input.    In this  ARST  mode, DVAL, EEN and
Video OUTPUT are disabled in order to prevent charges due to dark current from building
up in the sensor during standby periods and only LVAL is output

.

«
...
23
24
25
26
27
...
»

Содержание LQ-050CL

























































Отзывы:

Нет отзывов

Похожие инструкции для LQ-050CL

Бренд: Z-Wave Страницы: 13

Бренд: Uniden Страницы: 68

Air Live FE-200CU

Бренд: Ovislink Страницы: 3

Бренд: X-10 Страницы: 18

Бренд: Alecto Страницы: 76

DDF4900HDV Series

Бренд: dallmeier Страницы: 71

Бренд: Vacron Страницы: 17

Бренд: OpenEye Страницы: 44

Бренд: Satel Страницы: 10

Бренд: ESYLUX Страницы: 16

Бренд: Axis Страницы: 30

Бренд: Innotech Страницы: 24

Бренд: Daikin Страницы: 9

Бренд: Van Walt Страницы: 2

Бренд: Idview Digital Страницы: 2

DS-PDD12P-EG2-WB

Бренд: HIKVISION Страницы: 6

Digiplex NE DGP-NE96

Бренд: Paradox Страницы: 52

UniFi UVC-G4-PRO

Бренд: Ubiquiti Страницы: 33

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды