JAI EL-2800M-PMCL Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 87

background image

EL-2800M-PMCL / EL-2800C-PMCL

- 51 -

8.8.3 Motorized lenses

The EL-2800C-PMCL and EL-2800C-PMCL can use the 3-axis motorized lens control for
zoom, focus and iris. The following functions are available via the motorized lens
commands.

8.8.3.1 Iris

Open: While this command is supplied, the iris will continue to open.

Close: While this command is supplied, the iris will continue to close.

Stop: When this command is supplied, the iris operation stops.

8.8.3.2 Zoom

Wide: While this command is supplied, the zoom will continue to move towards wide

angle.

Tele: While this command is supplied, the zoom will continue to mode towards telephoto.

Stop: When this command is supplied, the zoom operation stops.

8.8.3.3 Focus+

Near: While this command is supplied, the focus will continue to shift closer to the

camera.

Far: While this command is supplied, the focus will continue to move towards infinity.

Stop: When this command is supplied, the focus operation stops.

8.8.4 Exclusive video output signal for iris control

This signal can be used for automatic lens iris control in Continuous and RCT modes.
The iris video signal is composed to average the video level in the center area of each frame
and can be output as a composite signal with H-sync.    This signal is always output from the
No.  4-pin  of  the  Hirose  12P  connector  and  can  also  be  output  from  the  Hirose  10P  AUX
connector as a factory option.

The following drawing  shows the  waveform  of  the  iris control video  signal.  This  signal is
output with the same video level within the same frame and the average is recalculated
with each new frame.

Fig. 44 Iris video output signal

The following parameters of this auto iris control signal output can be changed.

Auto Iris Control Signal Output:

ON: The auto iris control can be connected with AGC and ASC as ALC function

OFF: The auto iris control is not connected with AGC and ASC.

«
...
51
52
53
54
55
...
»

Содержание EL-2800M-PMCL
























































































Отзывы:

Нет отзывов

Похожие инструкции для EL-2800M-PMCL

PowerShot SX210 IS

Бренд: Canon Страницы: 180

PowerShot SD430 DIGITAL ELPH WIRELESS

Бренд: Canon Страницы: 7

PowerShot SD630 Digital ELPH Camera

Бренд: Canon Страницы: 137

Бренд: Canon Страницы: 2

Бренд: GE Страницы: 115

E-1 - Digital Camera SLR

Бренд: Olympus Страницы: 2

Бренд: Okina Страницы: 3

Бренд: Z-EDGE Страницы: 4

Бренд: D-Link Страницы: 41

Бренд: Abocom Страницы: 1

Бренд: FujiFilm Страницы: 125

Бренд: XtendLan Страницы: 34

Бренд: Quanmax Страницы: 38

Dash Cam Pro Plus

Бренд: 70mai Страницы: 55

Бренд: Zone defense Страницы: 8

Бренд: Kramer Страницы: 3

Бренд: Pentax Страницы: 98

Бренд: Parkmate Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды