manualshive.com logo in svg

JAI CV-A20CL, Руководство по эксплуатации

Поделиться
Скачать
JAI CV-A20CL Скачать руководство пользователя страница 27

 

 

CV-A20

 

CL / CV-A80

 

CL 

 

the ’Serial Port’ list box or click the ‘Auto’ button to search for a camera on communication port 

1 to 16.  
 
The Serial Port list box and the Auto search button are only active when COM-ports is selected.  

 

Camera Link communication:  

The ’CL Manufacturer/COM-ports’ list box also contains DLL file names (or frame grabber names) 
for all Camera Link frame grabbers that are installed in the pc. This is done by using a DLL file 

called "clserial.dll" to upload all frame grabber DLLs that are found in the pc.  

Just select the option for the frame grabber that is installed in the pc.  

 

Auto search  

Click the auto button to search for a camera on communication port 1 to 16. The camera control 

program automatically sends camera request on every communication port. The user is prompted 

to use a communication port if a camera answers the request.  

This button is only used for RS-232 communication. 
 

Off/On-line mode  

The Camera Control Tool Application can run Offline (without a camera attached) 

and all functions are fully functional in offline mode. 

 
Off line mode is indicated in The Communication Window, where a status field with 
graphic and text indicates the on/off-line status. The on-line/off-line status is also 
indicated by colored bar at the bottom of all windows. 

Changing the selected communication port (from the communication window) changes the 
online/off-line status. If a camera is found on the selected communication port the application 
runs online.    
  
Changing the settings in the application will automatically update the camera settings when the 
application is online.  
If the application looses connection with the camera it will automatically go to offline mode and it 
is indicated in the communication window.  
 

Synchronize program and camera  

The Camera Control software has the ability to synchronize either the camera or 
the program. Click Synchronize camera to write all settings from the program to 
the camera or click the Synchronize program to load all settings from the camera 
to the program.    

  

Files  

When clicking the Write to File or Read from File button, the user is prompted for a file using a 
standard file dialog. New files are created if they do not already exist.   
Files for camera settings have the extension cam. Information about the communication port is 
not stored in the files. All settings are automatically sent to the camera when a file has been 
loaded (if the camera is online).  

  

Factory and User Settings  

Use the Store button to store the current camera settings into the user settings area in EEPROM. 
Current camera settings are not saved when the camera is turned off. To save current camera 
settings you have to save them on the available user areas.  

Use the Load button to restore previously saved camera settings from either the Factory or the 
User EEPROM area.

26 

Содержание CV-A20CL




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды