Specifications
Dimensions
Dimensions for threads and double nipple:
Type
63/2100 D
63/2075 D
63/2050 D
Connector
1” Whitworth
3/4” Whitworth
3/4” NPT
Perforation
length
[mm]
1000
750
500
Double nipple length
square tube
100 x 100 mm
[mm]
150
150
-
Double nipple length
square tube
80 x 80 mm
[mm]
130
130
-
Double nipple length
tube DN100
(114,3 mm)
[mm]
190
-
-
Colour
code
blue
green
grey
Total length*
[mm]
1060
810
560
Tube
diameter
[mm]
63
63
63
ID-Sleeve**
[mm]
64 - 66
64 - 66
64 - 66
Perforated area
[m
2
]
0,18
0,135
0,09
*Other lengths on request.
** Exact diameter acc. to customer specification.
3/4” NPT-joint: maximal diffuser length 610 mm, diffuser will be connected to 3/4” NPT weld-on threaded nip-
ple. Double nipples for other tube dimensions on request.
1. Aeration System
This manual gives a detailed description of installation
and operating of the tube diffuser JetFlex TD 63 /2 with
the perforation lengths 1000 mm, 750 mm and 500 mm
(39.4“, 29.5”, 19.7”).
2. General
Gummi-Jaeger GmbH Aeration Components delivers aerating systems for applications in aeration
basins in communal and industrial waste water treatment plants.
The aerating systems are intended for fine-bubble compressed air ventilation of activated sludge in
biological waste water treatment. With membranes made of EPDM-rubber an intermittent operation
is possible due to the long-term elasticity of the membrane material.
For applications in industrial waste water treatment plants and/or in communal plants along with more
than 10% industry share please consult Gummi-Jaeger regarding suitability of membrane materials.
Quality properties of materials, perforation and bubble size/uniformity are controlled and recorded
generally.
The aeration systems are delivered completely assembled. Gummi-Jaeger GmbH Aeration Components
recommends a careful treatment of storage, transport and installation, to avoid damage of the mem-
branes.
The Gummi-Jaeger GmbH General Conditions of Sale are valid in their new version, respectively.
