Tool change
Item no. 10206008, Revision 00
31 ( 40 )
DANGER: Due to flying parts.
The hexagon socket wrench may be flung out during operation of the HF
spindle due to the high centrifugal forces that occur.
u
Remove the hexagon socket wrench after the tool change.
Ü
Turn back the locking ring until the access hole is closed again.
The hollow shank taper tool mount is correctly inserted when it lies level on
the end face of the shaft.
Ü
Follow the steps in reverse to remove the tool mount.
Ü
When loosening, make sure that you can feel the tool mount leave the
shaft.
