Jäger KA1-03/50, Руководство пользователя

Страница: 22 / 40

Operating location
Item no. 10301048, Revision 12 22 ( 40 )
7 Operating location
DANGER: Due to flying parts.
If the HF spindle is incorrectly attached, it may come loose during operation
and be flung away by the forces that occur.
u
Clamp the HF spindle firmly.
WARNING: Risk of injury due to flying parts.
The HF spindle operates at high speeds which may cause chips to fly out
with great force.
u Never remove the protective devices of the machine or system.
u
Always wear protective goggles during work.
Example of design: Mounting
surface
Note the following points before installing the HF spindle:
Ü Make sure that the correct spindle holder for the HF spindle is fitted in the
machine.
Ü
Check the connecting hoses for damage.
Ü Check the connecting cables for damage.
Ü Only use undamaged hoses and cables.
Ü Do not allow the HF spindle to run in the vicinity of a heat source.