Jäger KA1-03/50, Руководство пользователя

Страница: 12 / 40

Technical description
Item no. 10301048, Revision 12 12 ( 40 )
5 Technical description
5.1 Connections of HF spindle
7 1 3
1 Electrical connection
3 Sealing air G 1/8"
7 Pneumatic system for tool change G 1/8"
5.2 Electrical connection
The HF spindle may only be operated with a frequency converter (FC).
Ü
Check whether the current, voltage, and frequency data of the HF spindle
match the raw data for the frequency converter.
Ü Use a motor supply line that is as short as possible.
Ü Adjust the speed of the HF spindle using the FC.
Ü Refer to the frequency converter manual for further information.
The FC detects the following operating states of the HF spindle, depending on
the version:
q HF spindle rotating.
q HF spindle too hot.
q
HF spindle at a standstill, etc.
The FC forwards the operating states of the HF spindle to the machine con-
troller.