Safety instructions
Item no. 10405064, Revision 09
11 ( 48 )
CAUTION: Risk of injury due to emerging medium.
During work on the internal coolant supply, the medium may come into con-
tact with skin or eyes.
u
Observe the safety instructions for the flow medium that is used.
CAUTION: Risk of injury due to emerging medium.
If unsuitable hoses are used, they may become porous or burst.
u
To connect the internal coolant supply to the machine, choose suitable
hoses with specifications that match the application.
u
Use hoses that are approved for the medium.
u
Use hoses that are approved for the maximum system pressure of the
machine.
u
Use hoses that are approved for the maximum temperature of the
medium.
4.4
Installation and maintenance
Ü
Carry out installation, cleaning, and maintenance work only after shutting
down the HF spindle and after the shaft has come to a standstill.
Ü
Install all safety and protective devices of the machine immediately after
completing work.
4.5
Modification and repair
Modifications or alterations to the HF spindle are only permitted after prior
consultation with
Alfred Jäger GmbH
.
Only the service partners listed in the “Service and repair
” section are
authorized to open and repair the HF spindle.
Only approved accessories have been tested for operational safety and func-
tionality.
4.6
Improper operation
The high frequency spindle is only safe to operate for its designated use.
Ü
Observe the safety instructions in all sections of the manual to prevent
hazards to persons, the environment, the machine, or the HF spindle itself.
Failure to observe the safety instructions may invalidate any warranty claims
and compensation claims for damages.
