Operating location
Item no. 10406166, Revision 03
28 ( 48 )
6.7
Air-borne noise emissions
CAUTION: Noise has an impact on health.
u
Only operate the HF spindle if you are wearing hearing protection.
7
Operating location
DANGER: Due to flying parts.
If the HF spindle is incorrectly attached, it may come loose during operation
and be flung away by the forces that occur.
u
Clamp the HF spindle firmly.
WARNING: Risk of injury due to flying parts.
The HF spindle operates at high speeds which may cause chips to fly out
with great force.
u
Never remove the protective devices of the machine or system.
u
Always wear protective goggles during work.
Example of design: Mounting
surface
Note the following points before installing the HF spindle:
Ü
Make sure that the hole pattern of the HF spindle and hole pattern of the
mounting surface in the machine match.
Ä
Check the number and sizes of the mounting screws (optional acces-
sories).
Ü
Check the connecting hoses for damage.
Ü
Check the connecting cables for damage.
Ü
Only use undamaged hoses and cables.
Ü
Do not allow the HF spindle to run in the vicinity of a heat source.
