Jaga OXRE.015, Руководство по установке

Страница: 93 / 96

3 seconds
60 seconds
13.2.1. Manual operation
Manually lower / increase the position: quick press respectively [-] and [+]
13.2.2. From manual to automatic operation (c3/c4)
LEDs indicate ventilation level based on measured air quality.
13.3. NOTIFICATIONS / ERROR CODE
LED 1 flashes- problem with T sensor water
Check whether the sensor is connected. If necessary, replace the sensor
LED 2 flashes - problem with T sensor space
Check whether the sensor is connected. If necessary, replace the sensor
LED 3 flashes - problem with T sensor air
Check whether the sensor is connected. If necessary, replace the sensor
LED 4 flashes - communication problem with CO2 sensor.
Check whether the sensor is connected. If necessary, replace the sensor
LED 5 flashes - CO2 sensor not connected.
Check whether the sensor is connected. If necessary, replace the sensor
LED of activated position flashes quickly - Filter indicator
Replace the filter. After replacing the filter, the time clock of the filter
must be reset.
Please consult the service manual when replacing parts. If alerts persist, contact your installer or
distributor.
93
EN