Jaga MINI CANAL DBE, Руководство пользователя

Страница: 7 / 8

7
MINI CANAL DBE
CONTROL PANEL: USE / SETTINGS
ATTENTION !! ONLY QUALIFIED PERSONNEL!!. Adjust the water temperature. PAY ATTENTION !! The default setting of the "mode" button should not be changed !!
Setting the minimum water temperature heating (standard setting = > 28°C)
A Setting the temperature °C
24°C 26°C 28°C 30°C 32°C 34°C 36°C 38°C
I
- 2°C
+ 2°C
I
Press the (+) button until the red LED flashes 5 times.
5x
- +
MODE
B Increase the temperature
Press short (+) : the temperature increases 2°C by one step. If the
maximum temperature is reached, the red LED flashes rapidly.
Decrease the temperature
Press short (-) : the temperature decreases 2°C by one step. If the
minimum temperature is reached, the blue LED flashes rapidly.
Automatic controle:
The green LED blinks as the watertemperature is higher as the de
preset water temperature. This indicates that the water supply is
hot.
Each adjustment will be stored in internal (EE PROM) memory.
C Exit setup mode by pressing the "+" button until the red LED
flashes 5x.
The JDPC controller returns to normal mode after 30 seconds and
will automatically save all changed settings!
5x
- +
MODE
Put into the desired mode with the control panel
Press the button until you reach the desired mode (±3 sec.)
verwarmen
chauffer
Heizung
heating
1 2 MODE 3
1 2 MODE 3
3
sec
uit
éteinte
Aus
off
3
sec
3
sec
The watertemperature is lower as 28°: Leds flashing every 3”
How to use
or or
•
Speed 1
• •
Speed 2
• • •
Speed 3
1 2 MODE 3
1 2 MODE 3
1 2 MODE 3
1 2 MODE 3
1 2 MODE 3
1 2 MODE 3
1 2 MODE 3
1 2 MODE 3
1 2 MODE 3
1 2 MODE 3
1 2 MODE 3 1
1 2 MODE 3 1
1 2 MODE 3 1
1 2 MODE 3
1 2 MODE 3 1
1 2 MODE 3 1
1 2 MODE 3 1
1 2 MODE 3
1 2 MODE 3 1
1 2 MODE 3 1
1 2 MODE 3 1
(Summer mode)
CONTROL PANEL
JDPC.002