6
Clima Canal JDPC.002
Dynamic Product Controller:
Reset to Factory Default
Reset to Factory Default
1. Turn off power
• press and hold both “-” and “+” buttons simultaneously.
2. Turn power on. Press and hold both “-” and “+” buttons simultaneously until the
blue LED light
is blinking. After 2“ the
green LED
will light
and then after 4”, the
red LED
.
3. The controller will return to Factory Default settings, all LEDs will flash for 8“
ATTENTION: Doing so will erase all of the data, settings, and applications and reset the controller to the original factory settings !!
Please follow these instructions carefully in order to allow for
an error-free installation and a carefree use.
Warning:
This product is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
product.
Entitlement to warranty is cancelled in case of:
• errors or damage resulting from not following the assembly, cleaning
or user instructions supplied by the manufacturer,
• wrong, improper and/or irresponsible use or treatment of the device,
• wrong or incompetent repairs and defects due to external factors,
• self-applied changes to the device.
• equipment that is built in, in a way that it cannot be reached normally.
If you have any questions or complaints, please contact your supplier or
installer.
The copyright of these instructions is the property
of the company Jaga International.
27200.24100022 - juli 17, 2017 4:03 PM -
Jaga N.V.
Содержание Clima Canal JDPC.002
Страница 7: ...7 Notes...
