- With the thumb of hand B, push the button firmly against
the case, and while maintaining the pressure pull the strap
section toward you to remove it.
- Proceed in the same way for the other section.
Fitting the strap sections on the case
- Hold the back of the watch case between the thumb and
forefinger of one hand.
- Hold the strap section between the thumb and forefinger
of your other hand, and position its spring bar in the lug
housings.
- While maintaining the strap parallel with the case, insert
the spring bar firmly into the housings.
If you change strap, you can fit the folding clasp on your new
strap :
Removing the folding clasp
- With one hand hold the strap section, and take the tool in
the other hand. Position the tool vertically on the end of
the visible spring bar. Press vertically, and the spring bar will
be released.
- While maintaining pressure on the spring bar, tilt the strap
section outward to release it.
Refitting the folding clasp
- Place one end of the strap section spring bar in the
appropriate clasp housing.
- With one hand hold the strap section in the housing, and
take the tool in the other hand. Position the tool vertically
on the other end of the bar. Press vertically.
- While maintaining pressure on the spring bar, bring the
strap section back against the clasp. Release the pressure
on the bar at the last minute so that the spring has time to
insert the bar in its housing.
M
aster
C
oMpressor
e
xtreMe
W
orld
C
hronograph
- English
6/8
