JADEVER SCALE
SNUG III
4
Ⅲ
. Applications of general functions
3-1 Specification of weighing function
1.
Press down button
to start the scale; this time the whole screen will be displayed
and then count down, when screen shows 0.00 X , the scale may be used to weigh;
if backlight is needed, please press down button
. (It is not need to press down
the button if Auto backlight is set).
2. Press down button
to deduct the weight of article; press down button
to
cancel the deduction.
(Note: if the deducted weight is within the zeroing range, the deduction may be
cancelled and the scale is zeroed)
3. Press down button
to shift the weighing units.
Caution: the symbol of weighing unit will flash when the weight becomes unstable
during the weighing.
3-2 Specification of counting function
1. Under the weighing mode, press down button
to show XXXX pcs on screen
and to enter the counting function.
2. Then press down button
to enter the sampling mode for counting, and SE 0pcs
will be displayed on screen this time; please press down button
to select one out
of the following five sampling quantities in a cyclic manner: 20, 50, 100, 200, and 500.
3. After selecting the sampling quantity, place the article whose quantity is the same with
the selected one on the scale pan, and press down button
to begin sampling;
when the sound “bi” is heard and “SE” is disappeared, the sampling process is
completed.
