6
4-9-2-2 Counting: when it displays “pcs”, press<tare>. Now “pcs” lamp lighting.
Longtime press <on/zero>, it displays count and return to 0. Then put the sample (as much as possible, but
don’t more than max.capacity). After stable, press <tare>. Press <set/0~9> to add values and press<tare>to
choose. After finishing, it display pcs and pcs lamp lighting.
Caution:
pick quantities of max. less than 30000.
4-9-3 A-off
When it displays A-off, press <tare> to enter and press <set/0~9> to choose n or y. n is not in auto power off
situation. y is after 10 minutes in zero, it will be auto-off.
4-9-4 Filt (set display mode)
When it displays filt, press <tare>to enter and press <set/0~9> to choose filt-1 or filt-2 or filt-3 or filt-4. Press
<tare>to confirm.
Filt-1: Single animal scale function. Weighing in 3 seconds after place weight.
is lighting.
Filt-2: Many animal scale function. It shows very slowly after place weight., then
lighting.
Filt-3: It will show fast when add weight to scale. (suggestion)
Filt-4: It will show more faster when add weight to scale.
4-9-5 Zero
When it displays zero, press <tare>to enter and it displays zero range x.x. (x.x is auto zero range: 0.5d, 1d,
1.5d, 2d, 2.5d, 3d, 3.5d, 4d, 4.5d and 5d. d is division value. Press <set/0~9> to choose and press <tare> to
confirm and return weighing.
4-9-6 Buzzer
When it displays buzzer, press <tare> to enter and press <set/0~9> to choose on or off, “on” is using
“ding…” Sound in upper and lower limit situation. “off” is without “ding…” Sound.
4-9-7 d
When it displays d, press <tare> to enter and press <set/0~9> to choose division. Press <tare> to confirm.
There are three divisions of each capacity. When you choose the smaller one, the speed of display will be
slower.
4-9-8 Lu-
When it displays lu-, press <tare> to enter and press <set/0~9> to choose. lu-1 is lower brightness. lu-2 is
higher brightness. Press <tare> to confirm.
4-9-9 Install and Adjust
