Jadever JWI-501 Series, Инструкция по эксплуатации

Страница: 5 / 8

JWI-501 4
3-9-1-2
When choose on and press <
TARE
>, now enter to set limit. “ under ” lamp is
lighting , max figure is blinking. Press<
SET/0~9
> once to add 1. Press <
TARE
> to
confirm. When finishing, auto exit and set “ over ”(same as set under limit). After finish, turn
back to normal weighing mode.
3-9-1-3
When low limit > high limit, it displays off, then exit.
3-9-1-4
Alarming indicate: m is the weight
When m
≥
high limit, “over” lamp is lighting and flickering.
When low limit <m<high limit, “accept” lamp is lighting (not flickering).
When m
≤
low limit, “under” lamp is lighting.
Note
：
If the stable indication does not appear, no lamp lights.
3-9-2
UnItS : choose unit. Default = kg
3-9-2-1
When it displays units, press <
TARE
> to enter. Press <
SET/0~9
> to change.
Press <
TARE
> to confirm. Units
：
h9(kg), pcs, (counting), lb.lb(decimal pounds)
3-9-2-2
Counting
：
When it displays “pcs”, press<
TARE
>. Now “ pcs ” lamp lighting.
Press and hold <
ON/ZERO
>, it displays count and return to 0. Then put the sample (as
much as possible, but don’t more than max.capacity). After stable, press<
TARE
>. Press
<
SET/0~9
> to add 1 and press<
TARE
>to choose. After finishing, it displays pcs and
“ pcs ” lamp lighting.
exit counting: choose a weighing unit.
Note: Quantities of max less 30000
3-9-3
A-OFF : choose auto power off. Default = n
When it displays A-OFF , press <
TARE
> to enter. Press <
SET/0~9
> to choose “ n” or “ y” ,
n
= not in auto power off situation
; y
= after 10 minutes in zeroing, auto-off.
3-9-4
FILt : set display mode. Default = 3
When it displays FILt , press <
TARE
>to enter. Press <
SET/0~9
> to choose filt-1 or filt-2
or filt-3 or filt-4 . Press <
TARE
>to confirm.
filt-1
：
When add weight to scale, it will show the value till stable.
filt-2
：
When add weight to scale, it will show slow.
filt-3
：
When add weight to scale, it will show fast. (Recommend)
filt-4
：
When add weight to scale, it will show much faster.