background image

 

 
P/N 2412800000 REV. C 6/2011 

 

Page 7 

 

CAUTION:  In the event of prolonged power failure, 

DO NOT attempt to operate appliance. 

 
 
 
This appliance is serviceable to the front.  It is suggested to provide at least 36 inches to the 
front of the appliance for servicing and for proper operation. 
 
When the appliance is equipped with casters, the installation shall be made with a connector 
that complies with the standard for Connectors for Movable Gas Appliances, ANSIZ21.69-1987, 
and Addenda, Z21.691989, and a quick-disconnect device that complies with the Standard for 
Quick-Disconnect Devices for Use with Gas Fuel, ANSIZ21.41-1989.  Adequate length must be 
provided to limit the movement of the appliance without depending on the connector and the 
quick-disconnect device or its associated piping to limit its movement.  
 
When in use, the appliance must always be connected to the connector or restraining device. 
Should it become necessary to disconnect from this device during cleaning or servicing, be sure 
to reconnect the appliance to the connector or restraining device before the appliance is 
returned to the original installed position. 
 

TYPICAL RESTRAINING DEVICE INSTALLATION 

 

 

 
 

Содержание JSR








Отзывы: