Jadak Flexpoint HS2R9, Руководство пользователя

Страница: 29 / 56

29
9/10/15
Chapter 10 – REGULATORY, Service, Maintenance
The product is designed to support the following regulatory and
safety standards as a standalone unit. The end user will need to
verify general EMC compliance as implemented in their host system.
The end user will not need to verify RFID radio compliance since
JADAK LLC tested the HS2R9 and received modular certification for
this portion of the product.
10.1 FCC, IC
FCC Class B Compliance
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
o
Reorient or relocate the receiving antenna.
o
Increase the separation between the equipment and receiver.
o
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.