Jadak Flexpoint HS2R9, Руководство пользователя

Страница: 8 / 56

8
9/10/15
About the Battery
Power is supplied to the HS2R9 imager by a rechargeable battery located in the
body of the imager. Each HS2R9 imager is shipped with a Lithium Ion battery
already installed. See “HS2R9 Product Specifications” on page 8-1.
Charging Information
The HS2R9 imager is designed to recharge the battery whenever the imager is in
the base. Be sure that the base is connected to an appropriate power supply.
Battery Recommendations
Batteries are shipped approximately 30% to 60% charged and should be
fully charged for maximum charge capacity.
The battery is a lithium ion cell and can be used without a full charge, and
can also be charged without fully discharging, without impacting the
battery life. There is no need to perform any charge/discharge conditioning
on this type of battery.
Do not disassemble the battery. There are no user-serviceable parts in the
battery.
Keep the base connected to power when the host is not in use.
Replace a defective battery immediately since it could damage the imager.
Do not short-circuit a battery or throw it into a fire. It can explode and
cause severe personal injury.