TROUBLESHOOTING GUIDE
PROBABLE CAUSE
REMEDY
PROBLEM
18
9. Water not clean
.
*Note: The skills and tools necessary for the safe repair of this spa require the service of quali-
fied service personnel. Contact your Jacuzzi Whirlpool Bath dealer.
A. Clogged or blocked suction
strainer or skimmer basket.
B. Filter clogged (dirty).
C. Poor water chemistry.
D. Insufficient filtering.
E. Improper maintenance.
F. High content of solids in
water.
G. Filter motor plug not
connected.
H. Shut-off valve closed.
I. Mixing two chemicals when
adding to spa water.
A. Clean strainer/skimmer.
B. Clean or replace.
C. See "Chemistry" section (p11).
D. Increase daily filtering time.
E. See "Maintenance" section (pgs
11-15).
F. Use clarifier or drain and refill
spa.
G. Check filter motor connection
on SCM.
H. Check and Open valve.
I. Add chemicals one at a time;
allow a few minutes between
adding to spa water.
