OPERATION
ACCESSORY
The ACCESSORY switch controls these func-
tions in the continuous sequence indicated:
CONTROL PANEL
Controls
A switch panel giving you convenient control of the
JETS, FILTER, HTR/FLTR, light and air blower is lo-
cated on the spa rim.
To ensure your safety and allow easy operation, your
spa is equipped with two air-activated switches. One,
the SYSTEM switch, controls the whirlpool jets, heat,
and filtration. The other switch, ACCESSORY controls
the air blower and optional light.
Refer to the Control Panel illustration for an explana-
tion of the various switch functions.
SYSTEM
The SYSTEM switch controls the following four func-
tions in the continuous sequence indicated:
1. OFF
2. JETS
3. HTR/FLTR
4. FILTER
(The next selection is OFF again.)
Use the JETS function as a reference to indicate your
location in the function sequence, since that function is
the most obvious when operating.
For best performance and increased equipment life,
pause a second or two between push-button selections.
Not pausing may cause the switch to malfunction.
8
1. OFF
2. AIR/LIGHT
3. AIR
4. LIGHT
When the AIR (blower) function is activated, the jets will
turn off if they have also been selected by the SYSTEM
switch. Activating the AIR function will also turn off the
heater if the HTR/FLTR function has been activated by
the SYSTEM switch. (If the unit is properly converted to
operate at 230 VAC 50 AMP, 4-wire, no overriding of
features will exist.)
A
CC
ES
SOR
Y
HE
A
TER
O
F
L
I
G
H
O
F
S
Y
STE
M
J
ET
H
T
R
/
F
L
T
F
I
L
T
E
R
A
IR
/LI
GH
T A
I
R
OFF
(Time clock controls
filter pump. Heater will turn
on with filter
pump if thermostat is set.)
JETS
(Maximum whirlpool
action. Heater will
maintain temperature set
by thermostat if converted
to 230 VAC.)
HTR/FILTER
(Filter pump and heater
will turn on as necessary
to maintain water
temperature setting.)
TEMP.
CONTROL
KNOB
ACCESSORY SWITCH
(Controls Air Blower and
light functions.)
SYSTEM SWITCH
(Controls Jets,
Heater/Filter and Fliter
Only functions.)
FILTER
(Filter pump will run
continuously; heater will
turn on as necessary to
maintain water
temperature setting.)
HEATER
INDICATOR
LIGHT