background image

39

LX Collection

12.7  Top rail Care and maintenance

Parts should be cleaned with soap and water and a non-abrasive 

cleaning pad. More stubborn stains can be cleaned with a water based 

cleaning solution or cleaners specified for vinyl surfaces. Solvent based 

or aggressive degreasing cleaners should not be used. 

Small scratches or nicks resulting in the lighter colored sub surface being 

exposed can be made less obvious by using common furniture repair 

markers. These are generally available in packs with several wood tones 

from which a close match can be selected to the color of the scratched 

part.

12.8  stainless steel Corners

To prolong the life of the stainless steel, handle it with care and clean it 

regularly. Below are the care instructions. 

1.  A simply solution of warm water with a couple of drops of liquid soap 

makes an excellent cleaner. 

2.  Dampen a soft cloth (such as a microfiber cloth) into the cleaning 

solution. 

3.  Following the grain of the stainless steel, wipe and clean the steel.

4.  Dry off the stainless steel using another clean, dry soft cloth.

note:

 Never use abrasive cleaners, steel wool, scrubbing brushes, or 

scrubbing pads on the stainless steel. Should scratches occur, products 

are available at local home centers that can help fix them.

CauTIon: 

Never spray cabinet with a garden hose for any 

reason since this action may induce an electrical short in the 

spa’s electrical equipment.

12.9  winterizing

Your Jacuzzi spa is designed to automatically protect itself against 

freezing when operating properly. During periods of severe freezing 

temperatures, you should check periodically to be certain that the 

electrical supply to the spa has not been interrupted. In extreme, bitter 

cold weather less than -20°F (-29°C), choose the F3 “Standard” filtration/

heating mode to prevent freezing (page 

30). 

If you do not intend to use your spa, or if there is a prolonged power 

outage during periods of severe freezing temperatures, 

it is important 

that all water be removed from the spa and equipment to protect 

against damage from freezing.

 

Expert winterization of your spa is highly recommended, contact your 

authorized Jacuzzi dealer. In emergency situations, damage can be 

minimized

 by taking the following steps:

Содержание LX J - LX





































































Отзывы: