Jacuzzi J - 270 Скачать руководство пользователя

Страница: 10 / 52

page 6

3.3 Cautions

1. Persons suffering from heart disease, diabetes, high or low blood

pressure, and any condition requiring medical treatment, pregnant
women, the elderly, or infants should consult with a physician before
using a spa.

2. The Consumer Products Safety Commission/USA has stated that

the water temperature in a spa should not exceed 104°F (40°C).
Immersion in water in excess of 104°F (40°C) can be hazardous to

your health.

3. Observe a reasonable time limit when using the spa. Long expo

sures at higher temperatures can cause high body temperature.

Symptoms may include dizziness, nausea, fainting, drowsiness, and

reduced awareness. These effects could possibly result in drown-
ing.

4. Do not use the spa under the influence of alcohol, narcotics, or

other drugs. Use of the spa under these conditions may lead to seri

ous consequences.

5. Always test the spa water temperature before entering the spa.

Enter and exit the spa slowly. Wet surfaces can be very slippery.

6. Never bring any electrical appliances into or near the spa. Never

operate any electrical appliances from inside the spa or when you
are wet unless such appliances are built-in by the manufacturer.

7. Proper chemical maintenance of spa water is necessary to

maintain safe water and prevent possible damage to spa compo-
nents.

8. Use the straps and clip tie downs to secure the cover when not in

use. This will help to discourage unsupervised children from enter-
ing the spa and keep the spa cover secure in high-wind conditions.
There is no representation that the cover, clip tie-downs, or actual
locks will prevent access to the spa.

3.4 general Electrical Safety Instructions

Your new Jacuzzi

spa is equipped with a “state-of-the-art” equipment

system. It contains the most advanced safety and self-protective equip-

ment in the industry. Nonetheless, this spa must be installed properly to
ensure dependable usage. Please contact your local Jacuzzi dealer or

local building department should you have any questions regarding your
installation.

Proper grounding is extremely important. Jacuzzi spas are equipped

with a current collector system. A pressure wire connector is provided
on the surface of the control box, located outside the equipment door

(Figure-B, page 11)

to permit connection of a bonding wire between

this point and any ground metal equipment, metal water pipe or conduit

within 5 feet (1.5m) of the spa, or copper clad grounding rod buried

Содержание J - 270





















































Результаты поиска

Содержание J - 270

Отзывы:

Похожие инструкции для J - 270

Бренды по названию

Популярные бренды

Jacuzzi J - 270, Руководство пользователя

Результаты поиска

Содержание J - 270

Отзывы:

Похожие инструкции для J - 270

Бренды по названию

Популярные бренды