Jacuzzi J-200 Series, Руководство пользователя

Страница: 24 / 64

J-200
8. Place Cover On Spa
• Keeping the insulating cover in place anytime the spa is not in
use will reduce the time required for heating, thereby minimizing
operating costs.
• The time required for initial heat-up will vary depending on the
starting water temperature.
DANGER:
RISK OF PERSONAL INJURY.
Check water temperature carefully before entering hot tub!
Excessive water temperature can cause burns, welts and
body temperature to rise, hyperthermia (over-heating).
!
Decontamination Procedure (Steps 9-15)
Steps 9-15 below are only required when sanitizer levels are unstable
after performing steps 1-6 above. Disregard steps 9-15 below if sanitizer
levels remain stable after performing steps 1-6 above (refer to the inside
cover of the manual).
Note: The “decontamination procedure” steps 9-15 should also be used
after the spa has been “Winterized” (Section 12.7, page 42) or has
been sitting without power for an extended period.
9. Add 2.5 ounces of sodium dichlor for every 100 gallons of water.
Refer to the table below for approximate water fill volume by model.
CAUTION: RISK OF PERSONAL INJURY OR SPA DAMAGE!
Never add chlorine tablets (trichlor) or acid to your hot tub
for any reason! These chemicals may damage components
within your hot tub, burn or irritate your skin, create a rash,
and void the manufacturer warranty for your spa.
!
Water Fill Volume by Model
Model
Average Fill Volume* Sodium Dichlor
J-280 460 Gal (1,741 L) 12.0 oz
J-275 420 Gal (1,590 L) 10.5 oz
J-245 360 Gal (1,363 L) 9.0 oz
J-235 360 Gal (1,363 L) 9.0 oz
J-225 354 Gal (1,340 L) 9.0 oz
J-215 220 Gal (833 L) 5.5 oz
J-210 240 Gal (908 L) 6.0 oz
*Use average fill volume for chemical maintenance
20