Jacuzzi frame 100, Использование и обслуживание

Страница: 62 / 196

62
- Do not turn off the switch located upstream of the shower
enclosure until the final washing cycle for the steam genera-
tor has stopped.
- During the Turkish bath, it is possible to use the manual hydraulic
functions (shower, showerhead and/or spray jets); the audio system
and the Cromodream® function can also be activated (the alarm is
always available).
Q
TOP model
Press the "Turkish bath" key, the following configuration will ap-
pear on the display:
10/30

If a few seconds pass without pressing any key, the control
panel will return to the “awaiting instructions” mode and then
“stand-by”: press the “on/off” key to reactivate the control panel
and then the "Turkish bath" key to activate the desired function.
X
Press the “>” key to select the “water-pitcher” symbol (outline
on a white background).
10/30

The first number under the symbol indicates the number of
“Turkish baths” carried out (10, in this case) whereas the second in-
dicates the maximum number of "Turkish baths" possible before the
function is inhibited and a scale removal cycle must be activated.
X
Then press the “on/off” key to activate the function: the
"Turkish bath" key starts to flash and the display shows the
countdown of the remaining amount of time for pouring the
scale removal liquid.
Scale removal cycle
T
o resolve problems caused by the formation of scale in the steam
generator, the shower unit comes equipped with a function,
that, thanks to the action of a specific product, makes it possible to
remove any incrustations.
To guarantee complete cleaning of the steam genera-
tor, you must carry out the scale removal cycle after
20-25 "Turkish bath" functions.
The cycle lasts approx. 10 hours: during this period, the various
functions are available (except the Turkish bath).
X
Make sure that the waterfall, the whirlpool jets and/or the
Turkish bath are not active; also make sure that the control panel
is in the
“awaiting instructions” mode (refer to the “Activating
the electronic functions” chapter).
X
Prepare the scale removal liquid by pouring the scale removal
product (contained in the supplied bottle) into approx. 3/4 litres
of water; mix it all together so that it blends well.