Because your Santina spa is portable, you can locate it just about anywhere you wish—on a deck, patio, or even indoors.
Be sure to position it above ground in an area with good drainage and on a level, continuous surface which can support the
weight of the spa when filled with water and people; this weight is approximately 4203 lbs. You must also provide access
to the spa’s equipment for service and general maintenance.
Positioning Your Spa
The circuit must also have a ground wire in order to take
advantage of the designed-in safety features of the spa. A
bond wire must also be used. Bond according to procedure
described on the next page.
Caution: Without proper grounding and bonding, a
system malfunction may cause fatal shock.
Electrical Requirements
Your Santina, as it comes from the factory, requires a 230
VAC 50 AMP 4-wire grounded type electrical service and
must be in a separate circuit having no other appliance
connected in that circuit. If you do not have this kind of
circuit, a qualified electrician should be used to install the
necessary wiring. Inadequately sized wiring may cause a
voltage drop which could cause the unit to malfunction and
result in permanent damage to the spa’s electrical system.
4
MINIMUM SERVICE ACCESS
32"
50"
EQUIPMENT
DOOR
INSTALLATION
