MAINTENANCE
Spa Light
Two colored lenses are provided with your spa. To
change the lens, simply pull the lens out of the fitting and
replace it with the desired colored lens. Two replace-
ment bulbs (#912) are also included. Put them in a safe
place for future use. When a bulb burns out, replace it
from the back of the light fitting, pulling out the bulb
receptacle.
Cleaning Your Spa
Your Aero Plus spa shell consists of two layers of plastic
materials. Its smooth top surface of acrylic is tough and
durable and contains concentrated color. This is sup-
ported by a substantial thickness of fiberglass-rein-
forced polyester resin. A catalyst causes a chemical
reaction during manufacture that bonds these layers
permanently into a hard, strong material. With a mini-
mum amount of care and cleaning, your whirlpool spa
will look new for years.
To clean your spa, simply use a mild, non-abrasive liquid
detergent, isopropyl alcohol, or commercially prepared
spa cleaner. Do not use abrasive cleaners. You can
protect and restore the gloss to a dulled surface by
applying Meguiar’s #10 Mirror Glaze, which is a product
specifically designed for use on acrylic finishes. If
Meguiar’s is not available, an acrylic polish of equal
quality or automotive paste wax will do.
Use a spa cleaner for residue buildup at the water level
of the spa surface. This may be applied to the acrylic
surface with a soft cloth and wiped clean. Use sparingly
in small amounts to avoid contaminating the spa water.
If heavily soiled, it may be advisable to lower the water
level 2-3 inches before cleaning; then refill to normal
level.
Covering Your Spa
An optional rigid spa cover is available to place on top of
the spa. Use of this cover will help to minimize heat loss
and evaporation, and thus reduce energy costs. The
cover is also an attractive and efficient means of pre-
venting debris such as leaves and dirt from entering your
spa when not in use. Follow the instructions for use and
care provided with the spa cover.
CAUTION
While the spa cover is rigid, it is not designed to
support any weight. Therefore, as a safety precau-
tion and to preserve the life of your cover, you must
not sit, stand, or lie on it; nor should you place
objects of any kind on top of it.
Jacuzzi Whirlpool Bath does not guarantee or warrant
this cover.
SPA LIGHT BULB REPLACEMENT
LIGHT BULB
NORMAL
LENS
COLORED
FILTER
LIGHT
BEZEL
SHELL
BULB
RECEPTACLE
LOCKING
NUT
AERO SPA WITH RIGID
INSULATING COVER
17
Repairs to the Acrylic
Minor scratches which do not penetrate the color finish
(acrylic) can be removed with 600-grit wet/dry sandpa-
per. Restore the glossy finish with Meguiar’s #10 Mirror
Glaze or comparable automotive paste wax.
Major scratches or gouges which penetrate the acrylic
surface will require refinishing. Ask your Jacuzzi Whirl-
pool Bath dealer for special instructions.
