11/19
5.2. Maintenance of the product
Every 40 hours, clean the chamber and lubricate all the components. Use a pliers
to disassemble the parts and a brush with nylon bristles clean and neutral deter-
gent. Always use personal protective equipment (PPE).
5.3. Cleaning the sprayer
After finishing the spray application, clean and wash all equipment in an approved
decontamination area.
Operate the lever for the internal cleaning of the camera.
5.4. In case of clogged nozzle
Do not use metal instruments. Use a brush with nylon bristles clean and neutral
detergent.
Clean nozzles and filters
Clean nozzles with brush
6. Critical Safety and Health Information
• Put 5 liters of water in a bucket and add the chemical product.
• Stir until it becomes an homogeneous mixture.
• Pour the solution into the tank while filling with water.
WARNING!
Read carefully the chemicals manufacturer’s labels.
WARNING!
Wash hands and other parts of the body that have touched
chemicals before starting to spray.
• After finishing the spray application, take a shower with plenty of water and
soap.
• Put on clean clothes.
CAUTION!
Do not use the sprayer when tired, ill or under the influence
of alcohol or other drugs or medication.
WARNING!
Use of individual protective clothing and safety equip-
ment is obligatory.
NOTE: The clothing used during the application must be washed separate from
other clothes of ordinary use.
head protector
eyes protector
dust mask
long-sleeved shirt
apron
gloves
boot
long pants
Lubricate the parts according to the image below
Remove the chamber and lubricate the piston.
