Step Four: Attach draw bar and tie rod to tracking axle. . .
Slide the draw bar into the tongue,
secure with washer, castle nut and
tt
i
Straighten up the tires.
Rotate the tie rod clockwise
cotter pin.
Rotate the tie rod clockwise
to connect to tracking axle
linkage.
Adjust the distance of the tie rod so
that the draw bar is squared. Use the
nuts on the tie rod to tighten into
nuts on the tie rod to tighten into
position.
After connecting the rear of the tie rod
to the tracking axle and the draw bar is
square, then connect the tie rod to the
q
drawbar using the pin & cotter set.
1 - adjusts tracking axle
2 - adjusts wheel alignment
Содержание J-1000
Страница 1: ......