15/52
B)
•
Lubricate the darker areas indicated in the figure below.
•
Move the agitation lever to the vertical position as shown in figure B.
•
Lubricate the darker areas indicated in the figure below at every 100 hours
of use.
Agitation lever
11. Accessories (optional)
11.1. Anti-growth lance
11.3. Extension 600
1
Nº
Code
Description
Qty.
1
1236093
ANTI-GROWTH LANCE
1
Nº
Code
Description
Qty.
1
1222729
EXTENSION 600
1
11.1.1. Assembly instructions
1.
Connect the anti-growth lance to the trigger valve.
2.
Tighten enough to avoid leakage.
11.1.2. Use
The Tobacco lance is indicated for the application of anti-growth in tobacco.
11.2.1. Use
Recommended for calibrating the application dose
.
11.2. Calibration jug
Nº
Code
Description
Qty.
1
1269524
CALIBRATION JUG
1
10.2 Quick coupler maintenance and lubrication
•
Disconnect the quick coupler and remove the dirt over the connector;
•
Next, apply graphite-based grease around the connector sealing ring.
•
Fit in the quick coupler.
NOTE: This procedure must be followed weekly.
11.3.1. Assembly instructions
1.
Disconnect the lance from the trigger valve.
2.
Connect the trigger valve to the extension 600.
3.
Connect the lance to the extension 600.
11.3.2. Use
Recommended for extending the length of the boom to improve the drench ap-
plication.
NOTE: It is recommended to use the nozzle JD-40 for a proper drench application.
